Paper drills Dürselen PB.16 -
Technical data (I)

Standard configuration and
und basic data for all versions:

• 4 drill heads, up to 15 drill heads and special multi-spindle drill heads as retrofits
• Drill belt as drilling support
• Cooling and lubrication system for paper drill bits
• Spine margin behind drill bits 50 mm / 2"
• Hole distance 31,7 mm - 420 mm / 1 1/4" - 16 1/2",
  with multi-spindle heads down to 19,05 mm / 3/4",
  using the sliding table down to 7 mm
• Hole patterns selectable by program trims, one trim with all common hole patterns is included
• Size of sliding table 450 mm / 17 1/2" width x 320 mm / 12 1/2" depths
• Travelling distance of sliding table 310 mm / 12 1/4"
• Paper drill bit diameters 3 - 14 mm / 1/8" - 5/8", with special drill heads up to 38 mm / 1 1/2"
• Pile height up to 50 mm / 2", optional up to 75 mm / 3"
• Space requirements 950 mm / 37 1/2" wide x 890 mm / 35" deep x 1.420 mm / 56" high
• Power requirements 400 volts, 3 phases, 50 cycles, 16 A, 3 kW (4 HP)
• Compressed air consumption for cooling and lubrication 100 litres per minute at 2 bar pressure